TE-6070DX PM10 Hi-Vol Air Sampler, MFC, Digital Timer, Brush Motor, 220V 50Hz SKU: TE-6070DX

TE-6070DX PM10 Hi-Vol Air Sampler, MFC, Digital Timer, Brush Motor, 220V 50Hz

The TE-6070DX is a high volume air sampler designed for PM10 particulate matter collection using inertial separation in a specially shaped inlet to sample particles with aerodynamic diameters of 10 µm or less. This EPA Federal Reference Method sampler delivers reliable ambient air monitoring for environmental compliance and research applications.

Mass Flow Control Technology

The mass flow controller uses a flow sensor installed below the filter holder to monitor the mass flow rate and controls the motor speed accordingly to provide a constant sampling rate. This active flow regulation compensates for filter loading and environmental conditions throughout the 24-hour sampling period, maintaining precise flow rates required for proper particle size discrimination by inertial separation.

Key Specifications

• Sample Type: PM10 (particles ≤ 10 µm aerodynamic diameter)
• Flow Control: Mass Flow Control (MFC) system
• Timer: Digital timer with programmable sampling schedules
• Motor: Brush-style motor assembly
• Power: 220V, 50Hz configuration
• Flow Rate: Designed for 36-60 ft³/min operation during 24-hour sampling periods

Digital Timer Features

The US EPA recommended digital timer allows for 1 in 3, 1 in 6, 1 in 7, and custom sampling schedules. Its internal battery backup ensures that the timer will not have to be reset after a power failure. It also includes an LCD screen and soft press buttons for easy use.

Compliance and Applications

This sampler meets requirements specified in 40 CFR Part 50, Appendix J for PM10 reference method determination. PM10 high volume air samplers are designed according to the guidelines that are outlined in 40 CFR appendix J to part 50 and designated as a federal reference method sampler under designation number 0202-141. Applications include:

• Ambient air quality monitoring for regulatory compliance
• Environmental impact assessments
• Industrial emission monitoring
• Research and scientific studies

System Components

The TE-6070DX includes an anodized aluminum shelter designed for outdoor installations, providing weather protection while allowing particulate matter to be drawn onto the filter from all directions. The complete system integrates the PM10 size-selective inlet, 8" x 10" filter holder, mass flow controller, digital timer, and brush motor assembly in a field-ready configuration.

Alternative Configurations

The TE-6070 series offers multiple configurations to match specific power and operational requirements. For 220V 60Hz applications, consider the TE-6070DXZ. For 110V 60Hz operation, the TE-6070D provides the same MFC and digital timer features with brush motor technology.

Controller Type

MFC

Motor Type

Brush

Power Configuration

220volt, 50hz

Sample Type

PM10

Timer Type

Digital