Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 0.22 µm, 30 mm, 100/Pk - SF18285
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. Sterilizing-grade syringe filters deliver sterile-grade retention as a single-use format, eliminating the autoclaving and cleaning cycle a reusable sterile filtration setup would require. The cellulose acetate membrane achieves bacterial retention at the rated pore size and stays smooth with low extractable background. The polypropylene housing routes flow to minimize backpressure in service while shedding virtually no extractable material into the sample and leaves no seam for sample to bypass the membrane. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Membrane Characteristics
- BSA adsorption near 3.8 micrograms per square centimeter across the membrane
- Naturally hydrophilic surface wets readily with aqueous samples
- Biologically nontoxic cellulose ester provides a clean filtration surface
- Rated pore sizes of 0.22 micron and below block bacteria reliably
- Smooth membrane face with even pore distribution across the active filtration area
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Resists stress cracking from aqueous salt and buffer solutions
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 30mm
- Filtration Area
- 4.9cm²
- Flow Rate
- 40ml
- Holdup Volume
- 120µl
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121°C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 110ml
- Weight
- 0.91
- Wettability
- Hydrophilic
- IC Sample Prep - CA membrane clarifies aqueous samples before IC injection, protecting guard columns and extending column life without analyte loss.
- Aqueous Sample Prep - CA membrane clarifies water-based samples quickly without pre-wetting, protecting downstream instruments from particle fouling.
- Amino Acid Analysis - Hydrophilic CA clarifies amino acid standards and digest samples for HPLC or ion chromatography quantitation of food and feeds.
- Pharma Buffer Filtration - Low-extractable CA filters pharmaceutical-grade aqueous buffers ahead of formulation and biological assay applications.
- Serum Protein Analysis - Low-binding CA ensures serum proteins pass through without adsorption, preserving sample integrity for immunoassay panels.
- Allergen Testing Prep - CA's low-binding surface cleanly passes allergen proteins from aqueous food extracts ahead of ELISA allergen quantitation.