Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 1.2 µm, 30 mm, 100/Pk - SF18289
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Cellulose acetate admits water-based reagents immediately, with no surfactant step while binding BSA at 3.8 micrograms per square centimeter and stays smooth with low extractable background. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while keeping sample purity intact through the filtration pass and stays inert across common laboratory solvents. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Lot-to-lot uniformity in pore distribution produces consistent retention across batches
- Smooth membrane face with even pore distribution across the active filtration area
- Naturally hydrophilic surface wets readily with aqueous samples
- BSA adsorption near 3.8 micrograms per square centimeter across the membrane
- Dilute samples retain their true, unadsorbed concentration through the membrane
Housing Characteristics
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Rigid polypropylene body maintains its geometry through routine filtration pressure
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 5.8psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 30mm
- Filtration Area
- 4.9cm²
- Flow Rate
- 180ml
- Holdup Volume
- 120µl
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 1.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121°C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 110ml
- Weight
- 0.91
- Wettability
- Hydrophilic
- Diagnostic Assays - Delivers reliable results in enzymatic tests by limiting adsorption of active reagents to the membrane surface.
- Food Safety Analysis - Hydrophilic CA clarifies aqueous food extracts and beverages ahead of pesticide residue, mycotoxin, and contaminant analysis.
- Saline Solution Prep - CA membrane filters saline and physiological buffer solutions, removing particulates for in vitro assays and formulation use.
- Serum Protein Analysis - Low-binding CA ensures serum proteins pass through without adsorption, preserving sample integrity for immunoassay panels.
- Pharma Buffer Filtration - Low-extractable CA filters pharmaceutical-grade aqueous buffers ahead of formulation and biological assay applications.
- Stability Testing Prep - Hydrophilic CA membrane clarifies stability samples without analyte loss, supporting accurate potency tracking over time.