Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SF18292
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. The cellulose acetate membrane achieves bacterial retention at the rated pore size while admitting water-based reagents immediately, with no surfactant step and shield the polymer chains from direct protein adsorption. The PP housing sustains efficient flow on viscous samples and resists degradation from routine sample matrices. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.
Prefiltration
- Two-stage construction with the prefilter ahead of the final membrane
- Media graded from coarse to fine across the stack
- Depth media that capture particulate through their full thickness
- Nominal depth rating sized for coarse particulate capture
Membrane Characteristics
- Retains particles at the membrane surface instead of throughout its thickness
- Stable in aqueous saline, buffer, and protein solution matrices
- Minimal non-specific adsorption of analytes at the membrane surface
- Native surface hydroxyl groups sustain a hydration layer ahead of protein contact
- Smooth membrane face with even pore distribution across the active filtration area
Housing Characteristics
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- The seal formed against the membrane blocks bypass at rated operating pressure
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 32ml
- Holdup Volume
- 400µl
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF+GF+PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121°C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- Protein Recovery - Maximizes yield of target proteins by minimizing nonspecific binding, preserving valuable biological samples.
- Urinalysis Prep - CA clarifies urine samples by removing particulates ahead of automated urinalysis without altering biochemical composition.
- Pharma Buffer Filtration - Low-extractable CA filters pharmaceutical-grade aqueous buffers ahead of formulation and biological assay applications.
- Aqueous Sample Prep - CA membrane clarifies water-based samples quickly without pre-wetting, protecting downstream instruments from particle fouling.
- Food Safety Analysis - Hydrophilic CA clarifies aqueous food extracts and beverages ahead of pesticide residue, mycotoxin, and contaminant analysis.
- TOC Sample Prep - Hydrophilic CA removes particles from water samples with minimal carbon contribution, protecting total organic carbon measurement.