Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SF18293
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. Cellulose acetate delivers sterile-grade retention at the rated sub-micron pore size while maintaining a hydrated barrier ahead of any protein contact and stays stable across pH 4 to 8. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane and preserves sample chemistry across the flow path. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Prefiltration
- High dirt-holding capacity for the heaviest particulate loads
- Nominal depth rating sized for coarse particulate capture
- Layered glass fiber and polypropylene depth media
- Depth media that capture particulate through their full thickness
Membrane Characteristics
- No alcohol pre-wetting required before aqueous sample introduction
- Absolute-rated pores ensure the same particle cutoff every run
- Retains particles at the membrane surface instead of throughout its thickness
- Rated pore sizes of 0.22 micron and below block bacteria reliably
- Native surface hydroxyl groups sustain a hydration layer ahead of protein contact
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Optimized internal geometry minimizes backpressure in service
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Rated operating pressure supports filtration of high-resistance and viscous samples without housing distortion
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 32ml
- Holdup Volume
- 400µl
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF+GF+PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 50ml
- Weight
- 0.88
- Wettability
- Hydrophilic
- Low-Volume Sample Prep - CA syringe filters process precious microliter samples with minimal hold-up volume, maximizing recovery of dilute analytes.
- Alcohol Compatibility - Handles low molecular weight alcohols reliably, supporting specialized chemical clarification tasks in the laboratory.
- Food Safety Analysis - Hydrophilic CA clarifies aqueous food extracts and beverages ahead of pesticide residue, mycotoxin, and contaminant analysis.
- Protein Recovery - Maximizes yield of target proteins by minimizing nonspecific binding, preserving valuable biological samples.
- Cell Culture Filtration - CA membrane clarifies conditioned media and aqueous culture supplements without stripping nutrients or growth factors.
- Saline Solution Prep - CA membrane filters saline and physiological buffer solutions, removing particulates for in vitro assays and formulation use.