Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SF14487
Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. Low-binding cellulose acetate provides sterile-grade retention with high recovery while relying on hydroxyl chemistry alone, no coating needed and stays stable across pH 4 to 8. Low-extractable polypropylene keeps sample purity intact through the filtration pass while resisting degradation from routine sample matrices and holds its seal true run after run. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Membrane Characteristics
- Tolerates methanol and ethanol at typical laboratory working concentrations
- Stable in aqueous saline, buffer, and protein solution matrices
- Biologically nontoxic cellulose ester provides a clean filtration surface
- Retains particles at the membrane surface instead of throughout its thickness
- Absolute-rated pores ensure the same particle cutoff every run
Housing Characteristics
- Optimized internal geometry minimizes backpressure in service
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Impact-tolerant polypropylene body withstands routine bench handling without damage
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 32ml
- Holdup Volume
- 100µl
- Incompatibility
- Acids, dichloromethane, sodium hydroxide, ketones
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121°C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- Beverage Clarification - Removes haze-causing particulates from wine, beer, and juice samples ahead of quality and stability testing.
- Clinical Chemistry Prep - Clarifies turbid or lipemic serum and plasma samples ahead of loading onto automated clinical chemistry analyzers.
- Aqueous Sample Prep - CA membrane clarifies water-based samples quickly without pre-wetting, protecting downstream instruments from particle fouling.
- Biological Solutions - Offers a stable, hydrophilic membrane for sensitive aqueous fluids, letting critical analytes pass through freely.
- TOC Sample Prep - Hydrophilic CA removes particles from water samples with minimal carbon contribution, protecting total organic carbon measurement.
- Amino Acid Analysis - Hydrophilic CA clarifies amino acid standards and digest samples for HPLC or ion chromatography quantitation of food and feeds.