Cellulose Acetate Depth Filter Syringe, 1.0µm, 15mm, Hydrophilic, Fibrous Protein, 100/pk
LabExact SKU: LE-IWT-ES-10751

LabExact Cellulose Acetate (CA) Syringe Filters, 1 µm, 15 mm, 100/Pk - LE-IWT-ES-10751

A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. Cellulose acetate binds BSA at 3.8 micrograms per square centimeter and screens out particulates exceeding that stated micron level. The PP housing stays inert across common laboratory solvents and buffers in routine use and holds its seal true run after run. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.

Membrane Characteristics

• Tolerates methanol and ethanol at typical laboratory working concentrations
• Naturally hydrophilic surface wets readily with aqueous samples
• Minimal non-specific adsorption of analytes at the membrane surface
• Stable in aqueous saline, buffer, and protein solution matrices
• BSA adsorption near 3.8 micrograms per square centimeter across the membrane

Housing Characteristics

• Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
• Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
• Translucent housing wall allows visual confirmation of sample flow during filtration
• Optimized internal geometry minimizes backpressure in service

Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.

Sterilization Guidance

Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Diameter

15mm

Material

Cellulose Acetate (CA)

Pack Count

100

Pore Size (µm)

1

Sterility

Nonsterile

Weight

0.5

Wettability

Hydrophilic

• Stability Testing Prep - Hydrophilic CA membrane clarifies stability samples without analyte loss, supporting accurate potency tracking over time.
• PCR Sample Prep - CA's very low non-specific binding ensures nucleic acids and buffer components pass through cleanly ahead of PCR amplification.
• Temperature Stability - Maintains integrity across normal lab bench temperatures for consistent, dependable filtration performance.
• Pharma Buffer Filtration - Low-extractable CA filters pharmaceutical-grade aqueous buffers ahead of formulation and biological assay applications.
• Aqueous Sample Prep - CA membrane clarifies water-based samples quickly without pre-wetting, protecting downstream instruments from particle fouling.
• Amino Acid Analysis - Hydrophilic CA clarifies amino acid standards and digest samples for HPLC or ion chromatography quantitation of food and feeds.