Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 0.22 µm, 13 mm, 100/Pk - SF14485
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. Low-binding cellulose acetate provides sterile-grade retention with high recovery while admitting water-based reagents immediately, with no surfactant step and suits aqueous solutions, buffers, and alcohols. The polypropylene housing holds its seal true run after run while routing flow to minimize backpressure in service and resists degradation from routine sample matrices. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Membrane Characteristics
- Dilute samples retain their true, unadsorbed concentration through the membrane
- Tolerates methanol and ethanol at typical laboratory working concentrations
- Lot-to-lot uniformity in pore distribution produces consistent retention across batches
- No alcohol pre-wetting required before aqueous sample introduction
- Cellulose acetate's open pore structure supports high flow rates at low operating pressure
Housing Characteristics
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Resists stress cracking from aqueous salt and buffer solutions
An unfiltered buffer can foul your instrument and interrupt a run mid-sequence. Reliable particulate removal protects your instruments and your data so column life and baseline stability stay predictable. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 8ml
- Holdup Volume
- 20µl
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121°C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 10ml
- Weight
- 0.19
- Wettability
- Hydrophilic
- HPLC Sample Prep - Clarifies injection samples and mobile phases ahead of LC analysis, protecting columns from particulate fouling.
- Aqueous Sample Prep - CA membrane clarifies water-based samples quickly without pre-wetting, protecting downstream instruments from particle fouling.
- PCR Sample Prep - CA's very low non-specific binding ensures nucleic acids and buffer components pass through cleanly ahead of PCR amplification.
- Amino Acid Analysis - Hydrophilic CA clarifies amino acid standards and digest samples for HPLC or ion chromatography quantitation of food and feeds.
- Urinalysis Prep - CA clarifies urine samples by removing particulates ahead of automated urinalysis without altering biochemical composition.
- Saline Solution Prep - CA membrane filters saline and physiological buffer solutions, removing particulates for in vitro assays and formulation use.