Tisch Scientific Cellulose Acetate (CA) Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SF14494
Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. The cellulose acetate matrix stays stable across pH 4 to 8 while taking up aqueous buffers on contact and stays smooth with low extractable background. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while sustaining efficient flow on viscous samples and preserves sample chemistry across the flow path. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Cellulose acetate's open pore structure supports high flow rates at low operating pressure
- No alcohol pre-wetting required before aqueous sample introduction
- Lot-to-lot uniformity in pore distribution produces consistent retention across batches
- Biologically nontoxic cellulose ester provides a clean filtration surface
- Naturally hydrophilic surface wets readily with aqueous samples
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Translucent housing wall allows visual confirmation of sample flow during filtration
- PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
- The seal formed against the membrane blocks bypass at rated operating pressure
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 23.2psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 64ml
- Holdup Volume
- 100µl
- Material
- Cellulose Acetate (CA)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-170μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 50ml
- Weight
- 0.88
- Wettability
- Hydrophilic
- Amino Acid Analysis - Hydrophilic CA clarifies amino acid standards and digest samples for HPLC or ion chromatography quantitation of food and feeds.
- Low-Volume Sample Prep - CA syringe filters process precious microliter samples with minimal hold-up volume, maximizing recovery of dilute analytes.
- LC-MS Sample Prep - CA's low-binding surface preserves small molecule and peptide analytes from adsorption during aqueous preparation for LC-MS runs.
- Biomarker Assay Prep - Low-binding CA prevents biomarker adsorption during sample prep, preserving analyte concentrations for immunoassay panels.
- Alcohol Compatibility - Handles low molecular weight alcohols reliably, supporting specialized chemical clarification tasks in the laboratory.
- Temperature Stability - Maintains integrity across normal lab bench temperatures for consistent, dependable filtration performance.