Chat with us, powered by LiveChat

Secure Checkout
MCE Syringe Filter, 1.0um, 20mm, Double Luer-Lok, Sterile, 100/Pk

Thumbnail Filmstrip of MCE Syringe Filter, 1.0um, 20mm, Double Luer-Lok, Sterile, 100/Pk Images

    Purchase MCE Syringe Filter, 1.0um, 20mm, Double Luer-Lok, Sterile, 100/Pk

    MCE Syringe Filter, 1.0um, 20mm, Double Luer-Lok, Sterile, 100/Pk
    Tisch SKU: SPEC18184

    $185.99
    Ships in 4 weeks
     

    Tisch Scientific Mixed Cellulose Ester (MCE) Syringe Filters, 1 µm, 20 mm, 100/Pk - SPEC18184

    Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. MCE delivers absolute particle retention at the rated pore size while keeping an unbroken, visually even membrane finish and draws water-based samples through without pre-wetting. The rigid ABS housing keeps a tight edge seal against the membrane while staying dimensionally stable at warm sample temperatures and resists aqueous acids, bases, and alcohols. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.

    Membrane Characteristics

    • Smooth, optically uniform surface with uniform pore distribution
    • Naturally wettable surface begins passing aqueous samples immediately on contact
    • Cellulose ester composition supports aqueous compatibility across common laboratory buffers
    • Cellulose nitrate and cellulose acetate blend yields stable, precisely formed pore geometry
    • Protein binding reaches up to 160 micrograms per square centimeter of membrane

    Housing Characteristics

    • Withstands saline and seawater sample matrices up to 60°C
    • Impact-modified terpolymer absorbs bench drops without cracking
    • Low moisture absorption limits dimensional swelling during humid storage
    • Low extractable content from the ABS housing keeps filtrate analytical cleanliness high

    Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.

    Sterilization Guidance

    Sterile single-use packaging removes any in-lab sterilization preparation step.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    7.25psi
    Burst Pressure (psi)
    116psi
    Connection Type
    Double Luer Lock
    Construction
    Acrylonitrile Butadiene Styrene (ABS)
    Diameter
    20mm
    Dimensions
    23mmx25.2mm
    Filtration Area
    3.1cm²
    Material
    Mixed Cellulose Ester (MCE)
    Maximum Operating Pressure
    72.5psi
    Maximum Operating Temperature (°C)
    60°C
    Pack Count
    100
    Pore Size (µm)
    1.0
    Sterility
    Sterile
    Weight
    0.72
    Wettability
    Hydrophilic
    • Atmospheric PM2.5 Collection - Collects fine airborne particulate matter from air samples for gravimetric mass and chemical composition analysis.
    • Particle Analysis - Smooth, uniform surface removes fine particulates for accurate downstream contaminant identification in fluids.
    • Antibiotic Susceptibility Testing - Concentrates bacteria from clinical specimens before minimum inhibitory concentration determination.
    • Atomic Absorption Prep - Dissolves readily in dilute nitric acid, allowing retained particulates to be digested for spectroscopic analysis.
    • Coliform Counting - Traps coliform bacteria and E. coli on a gridded surface for colony counts in drinking water and wastewater compliance testing.
    • Fungal Spore Enumeration - Retains mold and yeast spores from air and aqueous samples on a gridded surface for direct colony counting.