Foxx EZFlow Polyethersulfone (PES) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - 372-2216-OEM
Foxx Life Sciences houses the EZFlow and EZlabpure membranes in polypropylene syringe filter bodies, pairing a Luer-Lok inlet with a Luer slip outlet for a secure connection to the syringe. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. PES's native polysulfone needs a surface treatment before it wets and stays stable across the pH 1 to 14 range. The PP housing sustains efficient flow on viscous samples while preserving sample chemistry across the flow path and holds its seal true run after run. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Prefiltration
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
- Added glass fiber stage extends usable throughput by delaying membrane clogging
- Depth-loading glass fiber matrix captures particulate throughout its full thickness
- High dirt-holding capacity suits very turbid, high-solids sample loads
Membrane Characteristics
- Sterilizing-grade PES membrane lots are challenge-tested against Brevundimonas diminuta to qualify 0.2 micron retention
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Pore structure integrity holds through autoclave cycles up to 126°C
- PFAS extractables test non-detectable under EPA Method 537.1
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- The seal formed against the membrane blocks bypass at rated operating pressure
Unfiltered particulates shift your retention times and peak shapes from run to run. Upstream sample clarification keeps your separations clean and reproducible from sample preparation through final injection. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- GF+PES Membrane
- Pack Count
- 100
- Sterility
- Nonsterile
- Cell Culture - Reduces the risk of mycoplasma contamination in growth media, supporting healthier cell lines and more reliable experimental outcomes.
- Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.