Foxx EZFlow PTFE Syringe Filters, 0.22 µm, 13 mm, 100/Pk - 386-2116-OEM
Foxx Life Sciences manufactures its EZFlow and EZlabpure syringe filters across its own filtration production facilities, applying the same quality system controls used throughout its life science product line. Sterilizing-grade syringe filters deliver sterile-grade retention as a single-use format, eliminating the autoclaving and cleaning cycle a reusable sterile filtration setup would require. The treated PTFE membrane combines aqueous wetting with broad solvent resistance while delivering sterilizing-grade liquid retention at sub-micron pore sizes and withstands aggressive organics that degrade other media. The PP housing stays inert across common laboratory solvents and buffers in routine use while keeping sample purity intact through the filtration pass and holds its seal true run after run. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Inert composition offers no nutrient source for microbial growth
- Chemical resistance spans the full pH 1 to 14 range
- High porosity minimizes hold-up volume for small sample volumes
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Low extractables keep the chromatographic background clean
Housing Characteristics
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Stable across the full aqueous pH range in routine sample work
An unfiltered buffer can foul your instrument and interrupt a run mid-sequence. Reliable particulate removal protects your instruments and your data so column life and baseline stability stay predictable. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- PTFE Membrane
- Pack Count
- 100
- Sterility
- Nonsterile
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.