Foxx EZFlow PVDF Syringe Filters, 0.45 µm, 33 mm, 100/Pk - 388-3416-OEM
Foxx Life Sciences houses the EZFlow and EZlabpure membranes in polypropylene syringe filter bodies, pairing a Luer-Lok inlet with a Luer slip outlet for a secure connection to the syringe. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. The hydrophilic PVDF membrane loads aqueous mobile phases on first contact while tolerating common chromatography solvents without degradation and clarifies samples at the rated pore size. The polypropylene housing holds its seal true run after run and stands firm against aqueous acids, bases, and alcohols during regular handling. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Fluorinated polymer chemistry resists ozone, UV, and ionizing radiation
- Thin membrane structure sustains high flow for fast sample throughput
- Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack
- Adsorptive loss of HPLC analytes stays immeasurably low
- Intrinsic protein binding runs lower than nylon or mixed cellulose ester
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Thermal-bonded construction keeps adhesives out of the fluid path
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- PVDF Membrane
- Pack Count
- 100
- Sterility
- Nonsterile
- IC Guard Filtration - Removes particulates from aqueous samples before ion analysis, keeping detector cells free of fouling between injections.
- Microbiome Sampling - Concentrates waterborne microbial cells on a low-binding membrane ahead of DNA extraction and metagenomics sequencing.
- HPLC Prep - Delivers high flow rates for mild organic HPLC mobile phases, ensuring clean baselines and protecting analytical columns.
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
- Pre-Blot Sample Prep - Ensures ultra-low protein binding for maximum sample recovery ahead of sensitive immunodetection protocols and assays.
- Protein Purification - Facilitates routine clarification of chromatography samples, preventing column fouling without binding target proteins.