Foxx EZFlow PTFE Syringe Filters, 0.22 µm, 13 mm, 100/Pk - 385-2116-OEM
Foxx Life Sciences houses the EZFlow and EZlabpure membranes in polypropylene syringe filter bodies, pairing a Luer-Lok inlet with a Luer slip outlet for a secure connection to the syringe. Each hydrophobic vent-rated filter carries manufacturer bacterial retention testing built into the design, letting a vent line stay in continuous service without repeating that testing on site between uses. Chemically inert PTFE achieves sterile-grade retention in gas and vent service and withstands aggressive organics that degrade other media. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while staying inert across common laboratory solvents and routes flow to minimize backpressure in service. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.
Membrane Characteristics
- Inert composition offers no nutrient source for microbial growth
- UL 94 V-0 rating confirms the highest self-extinguishing classification
- Membrane integrity holds across repeated autoclave sterilization cycles at 121°C to 134°C
- Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
- Absolute pore rating delivers reproducible retention across every protocol
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- PTFE Membrane
- Pack Count
- 100
- Sterility
- Nonsterile
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.