Foxx EZFlow Polypropylene (PP) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - 37B-2216-OEM
Foxx Life Sciences offers its EZFlow and EZlabpure syringe filters in both sterile and nonsterile formats, matching the format to routine sample preparation or aseptic filtration needs. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. The polypropylene matrix delivers nominal retention with high dirt-loading capacity and tolerates solvents and acids that degrade many membranes. The polypropylene housing preserves sample chemistry across the flow path and routes flow to minimize backpressure in service. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Low binding throughout the depth matrix preserves dilute analyte concentration
- Aqueous liquid is repelled while air passes freely through
- Operating pressure reaches 72 psi with a burst rating near 116 psi
- Dense polypropylene fiber network intercepts fine particles through the full medium depth
- Wets through readily under modest differential pressure despite an inherently hydrophobic surface
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Stable across the full aqueous pH range in routine sample work
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- PP Membrane
- Pack Count
- 100
- Sterility
- Nonsterile
- Polymer Solution Prep - Handles THF and alcohol polymer solutions with high loads for GPC and SEC column protection and sample clarification.
- Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.
- Agricultural Chemical Prep - Filters herbicide and pesticide formulations in aqueous and alcohol carrier media for field and regulatory testing.
- Injector Port Protection - Removes cell debris and protein precipitates before injection, guarding HPLC and GC autosampler needles from wear.
- Adhesive and Resin Analysis - Clarifies adhesive and polymer resin solutions in alcohol and aliphatic solvent media for quality and additive assay.
- Viscous Sample Prefilter - Handles heavy particulate loads with ease, acting as a dependable prefilter for viscous or dirty lab liquid samples.