Foxx EZlabpure PVDF Syringe Filters, 0.22 µm, 25 mm, 100/Pk - 748-2215-FLS
Foxx Life Sciences separates its syringe filter offering into the EZFlow and EZlabpure lines, spanning multiple pore sizes and membrane chemistries for sample clarification and prefiltration. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The PVDF membrane tolerates common chromatography solvents without degradation while stopping bacteria at its finest sub-micron ratings and reverses PVDF's natural affinity for protein adsorption. The polypropylene housing holds its seal true run after run while providing a factory-sterilized fluid path suited to aseptic sample preparation and maintains a low-dead-volume internal flow path. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.
Membrane Characteristics
- Absolute pore rating ensures reproducible results between test runs
- Adsorptive loss of HPLC analytes stays immeasurably low
- Vapor-phase hydrogen peroxide decontamination cycles leave the membrane intact
- Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
- Aqueous and HPLC samples wet the surface without pre-wetting
Housing Characteristics
- Polypropylene housing retains its chemical integrity under vaporized hydrogen peroxide decontamination cycles used in aseptic processing isolators
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Sterile barrier packaging assures the housing's factory-sterilized state is intact at the point of use
- Resists stress cracking from aqueous salt and buffer solutions
An unfiltered buffer can foul your instrument and interrupt a run mid-sequence. Upstream buffer clarification keeps your run from stalling on particulates that slipped through before they reach the column inlet or detector. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- PVDF Membrane
- Pack Count
- 100
- Sterility
- Sterile
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Protein Purification - Facilitates routine clarification of chromatography samples, preventing column fouling without binding target proteins.
- Pre-Blot Sample Prep - Ensures ultra-low protein binding for maximum sample recovery ahead of sensitive immunodetection protocols and assays.
- IC Guard Filtration - Removes particulates from aqueous samples before ion analysis, keeping detector cells free of fouling between injections.
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
- Microbiome Sampling - Concentrates waterborne microbial cells on a low-binding membrane ahead of DNA extraction and metagenomics sequencing.