Foxx EZlabpure PTFE Syringe Filters, 0.22 µm, 13 mm, 100/Pk - 745-2116-FLS
Foxx Life Sciences offers its EZFlow and EZlabpure syringe filters in both sterile and nonsterile formats, matching the format to routine sample preparation or aseptic filtration needs. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. Hydrophobic PTFE blocks aqueous ingress in vent and gas applications and handles concentrated acids and bases. The PP housing sustains efficient flow on viscous samples and resists degradation from routine sample matrices. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.
Membrane Characteristics
- High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
- Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
- Ionic and metallic extractable levels stay very low
- Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
- Non-wetting pore surface blocks liquid water while passing water vapor freely
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Thermal-bonded construction keeps adhesives out of the fluid path
- Optimized internal geometry minimizes backpressure in service
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- PTFE Membrane
- Pack Count
- 100
- Sterility
- Nonsterile
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.