Quantitative Filter Paper - Grade 41, 150mm, 100/pk - 1441-150
Every product line in the Whatman filtration portfolio passes through identical process controls, with rated performance confirmed lot by lot. Ashless grade filter paper anchors gravimetric analysis workflows in pharma, biotech, and environmental laboratories. Ashless cellulose construction keeps chemical background low for critical gravimetric methods while seating cleanly in funnels for gravimetric filtration steps and retains particulates at a fine, gravimetric-grade cutoff. When a gravimetric determination depends on the filter itself adding no measurable mass, the ashless grade's controlled ash ceiling keeps that determination valid.
Filter Paper Characteristics
- Compatible with hot filtration in gravimetric workflows
- Standard substrate for classical gravimetric precipitation methods in analytical chemistry
- Ash content held to a 0.007 percent maximum
- Adds no measurable mass to a gravimetric determination
- Fast flow rate accelerates filtration of large sample volumes
- Ignites completely on combustion
Undissolved solids riding along in an acid digest reach your instrument and skew the trace-metal figures you report. A clarified acid digest carries only the dissolved fraction to your instrument across the strong-acid matrices your digestion method runs. Not sure which product fits your order? Request a quote and current stock from the Tisch Scientific team.
- Diameter
- 150mm
- Flow Speed
- Fast
- Folded/ Fluted/ Pleated
- No
- Grade
- 41
- Hardened (Yes/ No)
- No
- Material
- Cellulose Fiber
- Nominal Ash Content (%)
- <0.007%
- Nominal Basis Weight (g/ m²)
- 85g/m²
- Pack Count
- 100
- Particle Retention
- 20um
- Pore Size (µm)
- 20.0-25.0
- Qualitative/ Quantitative
- Quantitative
- Sterility
- Nonsterile
- Wet Strengthened (Yes/ No)
- No
- Wettability
- Hydrophilic
- Pharmaceutical Analysis Prep - Ashless paper removes suspended particles from drug solutions ahead of pharmacopeial dissolution and assay testing.
- Gravimetric Analysis - Combusts completely during ignition, leaving the retained precipitate isolated from the filter matrix for mass determination.
- Dissolved Solids Measurement - Ashless paper removes suspended matter while its controlled ash ceiling keeps results within specification.
- Soil Suction Measurement - Absorbs moisture in proportion to matric suction for calibrated soil-water potential measurement under ASTM D5298.
- Acid Digest Prefiltration - Ashless paper filters mineral acid digests ahead of ICP and AAS analysis, keeping the analytical blank clean.
- Controlled Ash Determinations - Ashless grades cap ash content at 0.007 percent maximum across ignition-based quantitative methods.
Related Products