Quantitative Filter Paper - Grade 50, 110mm, 100/pk - 1450-110
Every product line in the Whatman filtration portfolio passes through identical process controls, with rated performance confirmed lot by lot. Analytical methods routinely name the ashless grade by number, letting a validated procedure move between laboratories without paper substitution. The ashless grade retains particulates at a fine, gravimetric-grade cutoff while seating cleanly in funnels for gravimetric filtration steps and suits trace-metal determinations with minimal metal carryover. Where acid and trace-metal resistance both matter, the gravimetric method stays on track through a demanding acid digestion without filter failure or ash-ceiling loss.
Filter Paper Characteristics
- Seats cleanly in standard Buchner and conical funnels for gravity and vacuum filtration
- Surface-hardened sheet resists fiber shedding during wet precipitate recovery and transfer
- Compatible with hot filtration in gravimetric workflows
- Ignites completely on combustion
- Standard substrate for classical gravimetric precipitation methods in analytical chemistry
- Leaves negligible carbon residue
A filter that contributes mass of its own puts a blank correction between you and the analyte you set out to weigh. A low, controlled ash on ignition leaves your precipitate as the bulk of the weighed residue from the crucible through the final weighing. Call the Tisch Scientific team for volume pricing and documentation to support your own product standardization across methods.
- Diameter
- 110mm
- Flow Speed
- Slow
- Folded/ Fluted/ Pleated
- No
- Grade
- 50
- Hardened (Yes/ No)
- Yes
- Material
- Cellulose Fiber
- Nominal Ash Content (%)
- <0.015%
- Nominal Basis Weight (g/ m²)
- 115g/m²
- Pack Count
- 100
- Particle Retention
- 2.7um
- Pore Size (µm)
- 2.7
- Qualitative/ Quantitative
- Quantitative
- Sterility
- Nonsterile
- Wet Strengthened (Yes/ No)
- Yes
- Wettability
- Hydrophilic
- Dissolved Solids Measurement - Ashless paper removes suspended matter while its controlled ash ceiling keeps results within specification.
- Hardened Ashless Filtration - Acid-treated hardened grade adds high wet strength and chemical resistance for demanding gravimetric method conditions.
- Low-Ash Gravimetric Work - Grades rated at 0.015 percent ash or below hold filter bias within routine quantitative tolerances.
- Soil Suction Measurement - Absorbs moisture in proportion to matric suction for calibrated soil-water potential measurement under ASTM D5298.
- Acid Digest Prefiltration - Ashless paper filters mineral acid digests ahead of ICP and AAS analysis, keeping the analytical blank clean.
- Pharmaceutical Analysis Prep - Ashless paper removes suspended particles from drug solutions ahead of pharmacopeial dissolution and assay testing.