Chat with us, powered by LiveChat

Secure Checkout
Grade 50 Filter Paper, Thin, 500mm Circle, 100/Pk

Thumbnail Filmstrip of Grade 50 Filter Paper, Thin, 500mm Circle, 100/Pk Images

    Purchase Grade 50 Filter Paper, Thin, 500mm Circle, 100/Pk

    Grade 50 Filter Paper, Thin, 500mm Circle, 100/Pk
    Whatman SKU: 1450-500

    $723.99
    Made to order. Contact us for lead time.
     

    Quantitative Filter Paper - Grade 50, 500mm, 100/pk - 1450-500

    Whatman's name appears throughout published laboratory literature, a track record that keeps its products cited in documented analytical methods. Hardened ashless filter paper undergoes an acid wash during manufacture that strips trace-metal contaminants before packaging. The ashless grade retains particulates at a fine, gravimetric-grade cutoff while keeping chemical background low for critical gravimetric methods and seats cleanly in funnels for gravimetric filtration steps. Where acid and trace-metal resistance both matter, the gravimetric method stays on track through a demanding acid digestion without filter failure or ash-ceiling loss.

    Filter Paper Characteristics

    • Low-ash rating with a 0.015 percent ceiling after ignition
    • Seats cleanly in standard Buchner and conical funnels for gravity and vacuum filtration
    • Basis weight between 75 and 96 grams per square meter
    • Leaves negligible carbon residue
    • Slow flow rate provides finer particle capture
    • Sheet thickness in the 115 to 160 micrometer range

    Undissolved solids riding along in an acid digest reach your instrument and skew the trace-metal figures you report. A low, controlled ash on ignition leaves your precipitate as the bulk of the weighed residue so a small, known paper blank is all you correct for. Not sure which product fits your order? Request a quote and current stock from the Tisch Scientific team.

    Diameter
    500mm
    Flow Speed
    Slow
    Folded/ Fluted/ Pleated
    No
    Grade
    50
    Hardened (Yes/ No)
    Yes
    Material
    Cellulose Fiber
    Nominal Ash Content (%)
    <0.015%
    Nominal Basis Weight (g/ m²)
    115g/m²
    Pack Count
    100
    Particle Retention
    2.7um
    Pore Size (µm)
    2.7
    Qualitative/ Quantitative
    Quantitative
    Sterility
    Nonsterile
    Wet Strengthened (Yes/ No)
    Yes
    Wettability
    Hydrophilic
    • Hardened Ashless Filtration - Acid-treated hardened grade adds high wet strength and chemical resistance for demanding gravimetric method conditions.
    • Soil Suction Measurement - Absorbs moisture in proportion to matric suction for calibrated soil-water potential measurement under ASTM D5298.
    • Low-Ash Gravimetric Work - Grades rated at 0.015 percent ash or below hold filter bias within routine quantitative tolerances.
    • Pharmaceutical Analysis Prep - Ashless paper removes suspended particles from drug solutions ahead of pharmacopeial dissolution and assay testing.
    • Gravimetric Analysis - Combusts completely during ignition, leaving the retained precipitate isolated from the filter matrix for mass determination.
    • Acid Digest Prefiltration - Ashless paper filters mineral acid digests ahead of ICP and AAS analysis, keeping the analytical blank clean.