Quantitative Filter Paper - Grade 540, 110mm, 100/pk - 1540-110
Whatman's name appears throughout published laboratory literature, a track record that keeps its products cited in documented analytical methods. Ashless grade filter paper anchors gravimetric analysis workflows in pharma, biotech, and environmental laboratories. The hardened ashless grade suits trace-metal determinations with minimal metal carryover and seats cleanly in funnels for gravimetric filtration steps. Where residual ash would confound a gravimetric determination of precipitate mass, the ashless grade's ash ceiling keeps the result trustworthy.
Filter Paper Characteristics
- Ignites completely on combustion
- Sheet thickness in the 115 to 160 micrometer range
- Adds no measurable mass to a gravimetric determination
- Seats cleanly in standard Buchner and conical funnels for gravity and vacuum filtration
- Leaves negligible carbon residue
- Surface-hardened sheet resists fiber shedding during wet precipitate recovery and transfer
Ash left behind by the filter itself inflates the precipitate mass you weigh after ignition. A low, controlled ash on ignition leaves your precipitate as the bulk of the weighed residue so a small, known paper blank is all you correct for. Call the Tisch Scientific team for volume pricing and documentation to support your own product standardization across methods.
- Diameter
- 110mm
- Flow Speed
- Medium
- Folded/ Fluted/ Pleated
- No
- Grade
- 540
- Hardened (Yes/ No)
- Yes
- Material
- Cellulose Fiber
- Nominal Ash Content (%)
- <0.006%
- Nominal Basis Weight (g/ m²)
- 88g/m²
- Particle Retention
- 8um
- Pore Size (µm)
- 8
- Qualitative/ Quantitative
- Quantitative
- Sterility
- Nonsterile
- Wet Strengthened (Yes/ No)
- Yes
- Wettability
- Hydrophilic
- Acid Digest Prefiltration - Ashless paper filters mineral acid digests ahead of ICP and AAS analysis, keeping the analytical blank clean.
- Dissolved Solids Measurement - Ashless paper removes suspended matter while its controlled ash ceiling keeps results within specification.
- Controlled Ash Determinations - Ashless grades cap ash content at 0.007 percent maximum across ignition-based quantitative methods.
- Hardened Ashless Filtration - Acid-treated hardened grade adds high wet strength and chemical resistance for demanding gravimetric method conditions.
- Gravimetric Analysis - Combusts completely during ignition, leaving the retained precipitate isolated from the filter matrix for mass determination.
- Soil Suction Measurement - Absorbs moisture in proportion to matric suction for calibrated soil-water potential measurement under ASTM D5298.
Related Products