Glass Fiber Filter Paper - Grade GF 6, 110mm, 100/pk - 10370006
Whatman's name appears throughout published laboratory literature, a track record that keeps its products cited in documented analytical methods. Testing programs that load a filter heavily, in liquid or gas streams, rely on binder-strengthened glass microfiber. Glass fiber paper uses an inorganic borosilicate matrix, not cellulose fiber while holding its shape through wet handling and drying cycles and retains particulates across a defined micron-rated grade series. Across a sample series in gravimetric and analytical clarification work, sample-to-sample reproducibility stays consistent on borosilicate glass microfiber.
Filter Paper Characteristics
- Handles concentrated hydrochloric and sulfuric acid solutions without degradation or dissolution
- Nominal thickness between 350 and 450 micrometers
- Sub-micron retention class for environmental water analysis
- Slow flow rate provides finer particle capture for demanding glass fiber separations
- High solids loading capacity for turbid, particle-dense environmental matrices
- Keeps its dimensions from wet handling through drying
Everything after the filter, from the number you report to the finer filter you protect downstream, rests on a clean and complete particulate separation. Consistent capture through a loaded sample keeps your particulate work predictable as the particulate load builds on the filter during the run. Send your order details to the Tisch Scientific team for a quote.
- Diameter
- 110mm
- Grade
- GF 6
- Material
- Glass Fiber (GF)
- Pore Size (µm)
- 1
- Sterility
- Nonsterile
- Wettability
- Hydrophilic
- Chlorophyll Determination - Captures phytoplankton and chlorophyll residue from water samples ahead of pigment analysis.
- Liquid Scintillation Counting - Collects labeled material for liquid scintillation measurement in radiochemical workflows.
- Sheet-Depth Capture - The microfiber sheet distributes captured particulate through its full depth instead of collecting it on one face.
- Low Media Migration - Bonded glass microfiber construction reduces fiber shedding into collected samples during high-load service.
- Water Pollution Analysis - Routine water and wastewater pollution testing runs on Grade GF 6 across environmental laboratories.
- Brewery Protein Removal - Grade GF 6 serves as a beer filter for protein removal in brewery quality-control testing workflows.