Glass Fiber Filter Paper - Grade GF 8, 90mm, 100/pk - 10370105
Every product line in the Whatman filtration portfolio passes through identical process controls, with rated performance confirmed lot by lot. Environmental monitoring and industrial QC labs reach for borosilicate glass microfiber when a sample carries variable particulate load. Glass fiber holds its shape through wet handling and drying cycles and uses an inorganic borosilicate matrix, not cellulose fiber. When a demanding sample load would tear an unreinforced glass sheet, the bonded microfiber stays whole through the full filtration pass.
Filter Paper Characteristics
- High solids loading capacity for turbid, particle-dense environmental matrices
- Nominal 3 micron retention for coarse particle capture
- Fast flow rate accelerates glass fiber filtration of large sample volumes
- Nominal thickness between 350 and 450 micrometers
- Handles concentrated hydrochloric and sulfuric acid solutions without degradation or dissolution
- Keeps its dimensions from wet handling through drying
Everything after the filter, from the number you report to the finer filter you protect downstream, rests on a clean and complete particulate separation. The particulate you separate out is ready for the step your method runs next whether that step weighs the residue, analyzes it, or sends the protected sample on to a finer filter. Not sure which product fits your order? Request a quote and current stock from the Tisch Scientific team.
- Diameter
- 90mm
- Grade
- GF 8
- Material
- Glass Fiber (GF)
- Pack Count
- 100
- Pore Size (µm)
- 1
- Sterility
- Nonsterile
- Wettability
- Hydrophilic
- Air Pollutant Retention - Grades GF 8 and GF 9 retain PCB, DDT, furan, and dioxin particulate for air pollution analysis.
- Low Media Migration - Bonded glass microfiber construction reduces fiber shedding into collected samples during high-load service.
- Workplace Dust Monitoring - Binder-strengthened glass fiber measures workplace exposure and particulate fractions in technical gas streams.
- Dust Collector Testing - Effectiveness checks on dust-collecting equipment run on Grades GF 8 and GF 9 in industrial programs.
- Dense Sample Prefiltration - Takes the first cut of dense, heavy samples as a dedicated prefilter stage before fine filtration.
- Sheet-Depth Capture - The microfiber sheet distributes captured particulate through its full depth instead of collecting it on one face.