Glass Fiber Filter Paper - Grade GF/D, 25mm, 100/pk - 1823-025
Lot-to-lot consistency and complete documentation trace back to Whatman's long-standing manufacturing platform, meeting what analytical laboratories expect as standard. Grades A through F span nominal particle retention from 0.7 to 2.7 microns, covering fine gravimetric analysis through coarse depth prefiltration. Binder-free glass fiber survives muffle-furnace ignition, unlike cellulose paper while holding its shape through wet handling and drying cycles and retains particulates across a defined micron-rated grade series. When a method needs a finer or coarser cut, moving to another grade in the same family keeps result reproducibility intact without qualifying a new filter supplier.
Filter Paper Characteristics
- Binder-free borosilicate glass survives muffle-furnace ignition with negligible mass change
- Sheet caliper between 530 and 700 micrometers
- High solids loading capacity for turbid, particle-dense environmental matrices
- Borosilicate glass matrix contributes negligible extractable ions or organics to aqueous filtrates
- Fast flow rate accelerates glass fiber filtration of large sample volumes
- Keeps its dimensions from wet handling through drying
Everything after the filter, from the number you report to the finer filter you protect downstream, rests on a clean and complete particulate separation. The particulate you separate out is ready for the step your method runs next whether that step weighs the residue, analyzes it, or sends the protected sample on to a finer filter. Request blanket-order pricing for your routine laboratory orders from the Tisch Scientific team.
- Diameter
- 25mm
- Grade
- GF/D
- Material
- Glass Fiber (GF)
- Pack Count
- 100
- Pore Size (µm)
- 2.7
- Sterility
- Nonsterile
- Wettability
- Hydrophilic
- Sheet-Depth Capture - The microfiber sheet distributes captured particulate through its full depth instead of collecting it on one face.
- High-Turbidity Clarification - Depth-loading construction handles cloudy sample streams that would blind finer filters without pre-centrifugation.
- Solvent-Compatible Filtration - Aqueous, alcohol, and hydrocarbon samples share one glass microfiber grade across mixed-solvent workflows.
- Graded Prefiltration Stack - Runs upstream of a finer glass fiber grade or membrane to spread particulate load across two filtration stages.
- Trace Element Blanks - Borosilicate glass minimizes contamination of filtrates in ICP-MS and ICP-OES trace-metal analysis of environmental samples.
- High-Temperature Ashing - Binder-free glass fiber paper withstands muffle-furnace temperatures for volatile-solids and loss-on-ignition steps.
Related Products