Your Cart (0)
Thumbnail Filmstrip of PolyCap TC 150 Capsule Filter, 0.8/0.2um, Sterile, 1/2in SB In & Outlet w/ Filling Bell Images
Whatman Polycap TC (PES) is available with and without a filling bell. They are disposable, dual layer polyethersulfone (PES) membrane filtration capsules that provide efficient filtration for critical aqueous solutions
The PES membrane is inherently hydrophilic, has low extractables, is biosafe, has excellent flow rates and exhibits low protein binding.
Features:
- Polycap TC/PES .2/.1, .2/.2 and .8/.2 um capsules pass the HIMA Challenge Test for Sterilizing Grade Filters.
- 1% integrity-tested during manufacturing; results are correlated to microbial retention.
- Housing thermally fused (no surfactants or mold releasing agents).
- Integrity-testable by bubble point, pressure decay, or forward flow methods.
- Available in sterile and nonsterile versions with a filling bell option.
- Manufactured in clean room facilities under ISO Quality Systems.
PES Membrane Protein Absorption Characteristics:
- HSA .4 ug/cm^2
- Insulin 2. ug/cm^2
- Gammaglobulin 1.5 ug/cm^2.
| Whatman Product Code | 6718-9582 |
| Material | Polyethersulfone (PES) |
| Pore Size | 0.2 µm |
| Inlet/Outlet Connectors | 1/2-Inch Stepped Barb |
| Vent | On Inlet |
| Length | 150 mm |
| Maximum Operating Pressure | 4.1 bar (60 psi) |
| Sterility | Nonsterile |
| Sterilization | Capsule may be autoclaved at 121°C for 20 minutes. However, an integrity test should be performed after autoclaving. |
| Endotoxin Level | LAL tested, ≤0.5 EU/ml |
| Pack Size | 1 + Filling Bell |
- Pore Size (µm)
- 0.8-0.2
- Sterility
- Sterile
- Wetability
- Hydrophilic