Whatman Anotop Aluminum Oxide Syringe Filters, 0.2 µm, 10 mm, 50/Pk - 6809-1022
Whatman's Anotop line separates by physical particle dimension alone, a capability rooted in ceramic media chemistry rather than the organic polymer chemistries used in most other membrane technologies. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. The Anotop membrane turns optically clear once wetted with liquid while presenting proteins with a permanently hydrophilic oxide surface and tolerates high temperatures and broad solvent ranges. The polypropylene housing holds its seal true run after run while standing firm against aqueous acids, bases, and alcohols during regular handling and routes flow to minimize backpressure in service. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Extractable content stays minimal without interfering with downstream detection
- Absolute pore-size rating holds consistent across every protocol
- Chemical stability in aqueous solutions spans a pH 3 to 9 range
- Anodized alumina matrix contains no monomers, plasticizers, adhesives, or wetting agents
- Low intrinsic autofluorescence limits background signal in fluorescence work
Housing Characteristics
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Resists stress cracking from aqueous salt and buffer solutions
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Rated operating pressure supports filtration of high-resistance and viscous samples without housing distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request a quote on Whatman filtration products from the Tisch Scientific team.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 6.2 bar (90 psi)
- Burst Pressure (psi)
- 100psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Anopore (Aluminum Oxide)
- Diameter
- 10mm
- Filtration Area
- 0.78cm²
- Holdup Volume
- <20µl
- Material
- Anopore
- Maximum Operating Pressure
- 100psi
- Maximum Operating Temperature (°C)
- 40°C
- Pack Count
- 50
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophilic
- Small Volume CE - Filter tiny sample volumes for capillary electrophoresis, minimizing hold-up volume to conserve valuable sample material.
- Biopharmaceutical Clarification - Filters bioprocess buffers and excipient solutions to meet the lowest achievable particulate specifications.
- Clinical Biomarker Prep - Removes debris from plasma and serum aliquots for protein and small-molecule biomarker profiling by mass spectrometry.
- DLS Sample Prep - Clarify nanoparticle suspensions before dynamic light scattering, removing dust that would skew the particle size result.
- Liposome Extrusion - Size liposomes into uniform vesicles precisely, enabling consistent drug delivery research with defined pore structures.
- Geochemical Water Analysis - Filters water and soil leachates to resolve the dissolved fraction for ICP-MS and atomic spectroscopy quantitation.