Whatman Anotop Aluminum Oxide Syringe Filters, 0.02 µm, 25 mm, 50/Pk - 6809-2102
Whatman's Anotop line separates by physical particle dimension alone, a capability rooted in ceramic media chemistry rather than the organic polymer chemistries used in most other membrane technologies. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. Low-binding aluminum oxide provides sterile-grade retention with high recovery and tolerates high temperatures and broad solvent ranges. The PP housing is factory-sterilized and individually wrapped for aseptic sample preparation and maintains a low-dead-volume internal flow path. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Chemical stability in aqueous solutions spans a pH 3 to 9 range
- Rigid inorganic structure withstands high temperatures with minimal extractables
- Uniform capillary pore array gives high pore density without lateral crossover
- Mineral oxide chemistry gives proteins little to adsorb onto
- Inorganic ceramic structure resists solvent swelling common to polymer membrane materials
Housing Characteristics
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Withstands ethylene oxide gas sterilization without embrittlement or structural damage
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Polypropylene housing retains its chemical integrity under vaporized hydrogen peroxide decontamination cycles used in aseptic processing isolators
An unfiltered buffer can foul your instrument and interrupt a run mid-sequence. Reliable particulate removal protects your instruments and your data across reagent, buffer, and mobile-phase preparation. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 6.9 bar (100 psi)
- Burst Pressure (psi)
- 100psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Anopore (Aluminum Oxide)
- Diameter
- 25mm
- Filtration Area
- 4.15cm²
- Holdup Volume
- <150µl
- Material
- Anopore
- Maximum Operating Pressure
- 100psi
- Maximum Operating Temperature (°C)
- 40°C
- Pack Count
- 50
- Pore Size (µm)
- 0.02
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophilic
- Single-Particle Analysis - Concentrates nanoparticles from dilute suspensions for tunable resistive pulse sensing and nanoparticle tracking.
- Protein Aggregate Removal - Strips antibody and biologic formulations of aggregate species before SEC-MALS and DLS molecular weight characterization.
- Multiplex Bead Assay Prep - Clears immunoassay sample matrices of residual debris that would cause carryover interference between bead populations.
- Cold Sterilization - Sterilize heat-sensitive additives safely, using 0.02 µm pores to remove bacteria without degrading critical components.
- Environmental DNA Sampling - Concentrates aquatic environmental DNA from water samples for downstream eDNA metabarcoding and biodiversity monitoring.
- Diagnostic Assay Input - Delivers ultrapure aqueous filtrates from clinical matrices for enzymatic and colorimetric point-of-care diagnostic assays.