Anotop Plus 10mm Syringe Filter w/GMF PreFilter, 0.02 um, 50 Pk
Whatman SKU: 6809-3002

Whatman Anotop Aluminum Oxide Syringe Filters, 0.02 µm, 10 mm, 50/Pk - 6809-3002

Whatman's brand recognition and documented performance history support specification in standardized analytical methods. Syringe filters give the analyst a single-use device for clarifying samples right at the bench. Aluminum oxide keeps protein binding low to maximize sample recovery and presents a high-density honeycomb pore structure. Polypropylene construction maintains housing integrity through the filtration run while resisting degradation from routine sample matrices and keeps the fluid path low in extractable contamination. For routine sample preparation across many methods, the syringe filter folds clarification into one disposable step.

Technical Specifications

• Absolute pore-size rating gives consistent retention across protocols
• Low protein binding preserves dilute analytes for maximum sample recovery
• Naturally hydrophilic ceramic surface wets without pre-wetting in aqueous samples
• Uniform capillary pore array gives high flow and high pore density
• Rigid inorganic structure withstands high temperatures with minimal extractables

Housing Specifications

• Optimized internal geometry minimizes backpressure in service
• Reliable housing-to-membrane seal prevents bypass at rated pressure
• Low extractable contribution protects sensitive downstream analyses
• Thermal-bonded construction keeps adhesives out of the fluid path

Sample clarification before injection is the cheapest insurance your chromatography system has. Upstream sample clarification keeps your separations clean and reproducible across your HPLC and UHPLC methods. Reach out to the Tisch Scientific team for application support, volume pricing, and technical assistance with your filtration product selection.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

6.9 bar (100 psi)

Burst Pressure (psi)

100psi

Connection Type

Luer-Lok/ Luer Slip

Construction

Anopore (Aluminum Oxide)

Diameter

10mm

Filtration Area

0.78cm²

Holdup Volume

<20µl

Material

Anopore

Maximum Operating Pressure

100psi

Maximum Operating Temperature (°C)

40°C

Pack Count

50

Pore Size (µm)

0.02

Prefilter (Yes/No)

No

Sterility

Nonsterile

Volume Throughput (ml)

Up to 10ml

Wettability

Hydrophilic

• Quality Control Testing - Optimized for delivering reproducible results by filtering contaminants in standard pharmaceutical protocols
• Analytical Sample Prep - Optimized to ensure data integrity by effectively filtering contaminants before instrumental analysis
• Sample Clarification - Optimizing sample clarity via rapid filtering of contaminants to maintain high throughput in busy laboratories
• Particulate Removal - Designed for filtering contaminants, this filter aids in optimizing sample clarity across diverse sample types
• Research & Development - Supports protocols that need to filter contaminants, providing the ability to optimize sample clarity
• Biological Fluid Analysis - Protects sensitive downstream instruments from filtering contaminants that can cause system failure