Whatman GD/X Nylon Syringe Filters, 5 µm, 25 mm, 150/Pk - 6870-2550
Whatman pairs a borosilicate fiber depth layer with the finishing membrane inside every GD/X unit, a construction meant to process loads heavy enough to clog a conventional one-stage filter. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. The nylon membrane clarifies particulates at the rated pore size while accepting water-based reagents without surfactant conditioning and supports high-volume routine filtration. The PP housing stays inert across common laboratory solvents and buffers in routine use and sheds virtually no extractable material into the sample. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Prefiltration
- Glass microfiber prefilter shields the downstream membrane from bulk particulate
- Glass microfiber depth media loads particulate across its full thickness
- Nominal glass microfiber depth layer sustains flow through high-solids, particle-laden samples
- Upstream glass microfiber prefilter layer captures coarse particulate ahead of the membrane
Membrane Characteristics
- Non-fibrous membrane structure resists media shedding into the filtrate
- Filtration clarifies HPLC mobile phase buffers of particulates
- Low extractable contribution to sensitive analytical preparations
- Saturation moisture uptake reaches up to 8% by resin weight
- Autoclaving at 121°C for 30 minutes leaves pore structure intact
Housing Characteristics
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- PP housing rated to 121°C holds its geometry through high-temperature sample preparation and processing
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Request Whatman's quality documentation to support your filtration step meeting a recognized laboratory-science standard.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Holdup Volume
- 1.4ml
- Material
- Nylon
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 5
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophilic
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
- Buffer Filtration - Delivers high mechanical strength for efficient clarification of alkaline buffers and aqueous reagents in the lab.
- Mining Process Waters - Clarifies process water samples from hydrometallurgical operations, removing solids ahead of ICP-MS trace metal quantitation.
- Beverage QC Clarification - Clarifies wine, beer, and juice samples ahead of analytical and microbiological testing in quality control labs.
- Ink and Dye Filtration - Filters aqueous and solvent-based inks and dyes, removing pigment agglomerates ahead of color strength analysis.
- Tissue Homogenate Prep - Pairs a glass-fiber prefilter with a nylon final membrane to clarify particulate-heavy tissue homogenates for analysis.