Whatman GD/X PVDF Syringe Filters, 0.2 µm, 25 mm, 150/Pk - 6873-2502
Whatman fits more prefiltration capacity into the GD/X housing without enlarging it, a space-efficient answer for samples too demanding for one filtration pass. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. The hydrophilic PVDF membrane loads aqueous mobile phases on first contact while stopping bacteria at its finest sub-micron ratings and reverses PVDF's natural affinity for protein adsorption. The PP housing sustains efficient flow on viscous samples while leaving no seam for sample to bypass the membrane and maintains structural integrity through elevated-temperature sample preparation. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.
Prefiltration
- Nominal glass microfiber depth layer sustains flow through high-solids, particle-laden samples
- High dirt-holding capacity extends usable throughput by delaying membrane clogging
- Glass microfiber depth media loads particulate across its full thickness
- Two-stage construction pairs a glass microfiber depth prefilter with the final membrane
Membrane Characteristics
- Adsorptive loss of HPLC analytes stays immeasurably low
- Absolute pore rating ensures reproducible results between test runs
- Intrinsic protein binding runs lower than nylon or mixed cellulose ester
- Autoclave sterilization cycles leave pore structure and flow performance intact
- Resistance to hydrolytic degradation exceeds that of nylon membranes
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Stable across the full aqueous pH range in routine sample work
Unfiltered particulates shift your retention times and peak shapes from run to run. Pre-injection filtration protects the resolution your methods depend on so your retention times and peak shapes stay consistent. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.8 bar (26 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Holdup Volume
- 1.4ml
- Material
- PVDF/GF
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Protein Purification - Facilitates routine clarification of chromatography samples, preventing column fouling without binding target proteins.
- High-Particulate Filtration - Integrates a glass microfiber prefilter stack that clears heavy solids, extending membrane life for tough samples.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Mycotoxin Screening - Clarifies grain and food extracts ahead of HPLC analysis, supporting reliable detection of aflatoxins and other mycotoxins.
- Microbiome Sampling - Concentrates waterborne microbial cells on a low-binding membrane ahead of DNA extraction and metagenomics sequencing.