Chat with us, powered by LiveChat

Secure Checkout
GD/X 13mm Syringe Filter, PTFE Filteration Medium, 0.45um (1500 pcs)

Thumbnail Filmstrip of GD/X 13mm Syringe Filter, PTFE Filteration Medium, 0.45um (1500 pcs) Images

    Purchase GD/X 13mm Syringe Filter, PTFE Filteration Medium, 0.45um (1500 pcs)

    GD/X 13mm Syringe Filter, PTFE Filteration Medium, 0.45um (1500 pcs)
    Whatman SKU: 6875-1304

    $2,920.99
    Ships in 7 weeks
     

    Whatman GD/X PTFE Syringe Filters, 0.45 µm, 13 mm, 150/Pk - 6875-1304

    Whatman pairs a borosilicate fiber depth layer with the finishing membrane inside every GD/X unit, a construction meant to process loads heavy enough to clog a conventional one-stage filter. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. PTFE suits solvent and reagent filtration where other membranes fail while blocking aqueous ingress in vent applications and reaches the same absolute retention on every run. The PP housing stays inert across common laboratory solvents and buffers in routine use while shedding virtually no extractable material into the sample and maintains a low-dead-volume internal flow path. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.

    Prefiltration

    • Two-stage construction pairs a glass microfiber depth prefilter with the final membrane
    • Glass microfiber prefilter shields the downstream membrane from bulk particulate
    • Glass microfiber depth media loads particulate across its full thickness
    • High dirt-holding capacity extends usable throughput by delaying membrane clogging

    Membrane Characteristics

    • Node-fibril microstructure resists compaction under sustained operating pressure
    • Insolubility in all known organic solvents avoids swelling and pore distortion
    • Gas-venting and liquid-blocking function survives repeated autoclave sterilization cycles
    • Chemical resistance spans the full pH 1 to 14 range
    • Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack

    Housing Characteristics

    • Plasticizer-free polyolefin construction keeps the fluid path clean
    • The seal formed against the membrane blocks bypass at rated operating pressure
    • Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
    • Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep

    Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work so your downstream method starts with a clean sample. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    0.6 bar (9 psi) [IPA]
    Burst Pressure (psi)
    75psi
    Connection Type
    Luer-Lok/ Luer Slip
    Construction
    Polypropylene
    Diameter
    13mm
    Filtration Area
    1.3cm²
    Holdup Volume
    0.5ml
    Material
    Polytetrafluoroethylene (PTFE)
    Maximum Operating Pressure
    75psi
    Maximum Operating Temperature (°C)
    121°C
    Pack Count
    150
    Pore Size (µm)
    0.45
    Prefilter (Yes/No)
    Yes
    Prefilter Material
    Glass Microfiber (GMF)
    Sterility
    Nonsterile
    Sterilization
    Autoclavable 121°C
    Volume Throughput (ml)
    Up to 10ml
    Wettability
    Hydrophobic
    • Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
    • Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
    • Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
    • Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
    • Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
    • Environmental Prep - Clears heavy particulate loads from solvent-based soil and sediment extracts, pairing a glass prefilter with a PTFE membrane.