Whatman GD/X PTFE Syringe Filters, 0.2 µm, 25 mm, 150/Pk - 6875-2502
Whatman places a fibrous glass mat before the final membrane in every GD/X device, clearing a turbid sample in one pass through the same housing. Gas and vent service calls for a hydrophobic syringe filter rated to the same sterilizing-grade pore size as its liquid counterpart. The PTFE membrane withstands aggressive organics that degrade other media while delivering sterilizing-grade gas and vent filtration and handles concentrated acids and bases. The polypropylene housing maintains its geometry through sample runs up to 121°C while standing firm against aqueous acids, bases, and alcohols during regular handling and presses snugly against the membrane during the pass. Downstream equipment and work areas stay protected from airborne bacterial contamination once the vent path runs through the membrane.
Prefiltration
- Glass microfiber depth media loads particulate across its full thickness
- Two-stage construction pairs a glass microfiber depth prefilter with the final membrane
- Upstream glass microfiber prefilter layer captures coarse particulate ahead of the membrane
- Glass microfiber prefilter shields the downstream membrane from bulk particulate
Membrane Characteristics
- Low extractables keep the chromatographic background clean
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Stable across a wide operating temperature range for demanding methods
- Node-fibril microstructure resists compaction under sustained operating pressure
- Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.0 bar (15 psi) [IPA]
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Holdup Volume
- 1.4ml
- Material
- GF/PTFE
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- QuEChERS Extract Cleanup - Clears matrix debris from acetonitrile-based pesticide extracts with a glass prefilter ahead of LC-MS/MS analysis.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.