Whatman GD/X Polyethersulfone (PES) Syringe Filters, 0.2 µm, 13 mm, 150/Pk - 6876-1302
Whatman fits more prefiltration capacity into the GD/X housing without enlarging it, a space-efficient answer for samples too demanding for one filtration pass. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. The PES matrix tolerates aliphatic alcohols, glycols, and aqueous buffers and admits aqueous reagents on contact, skipping any surfactant rinse. The PP housing stays inert across common laboratory solvents and buffers in routine use while preserving sample chemistry across the flow path and maintains structural integrity through elevated-temperature sample preparation. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Prefiltration
- Two-stage construction pairs a glass microfiber depth prefilter with the final membrane
- Glass microfiber prefilter shields the downstream membrane from bulk particulate
- High dirt-holding capacity extends usable throughput by delaying membrane clogging
- Upstream glass microfiber prefilter layer captures coarse particulate ahead of the membrane
Membrane Characteristics
- Sulfone backbone's hydrolytic stability tolerates repeated autoclave steam sterilization cycles
- DNA and RNA pass through with negligible adsorptive loss
- Aromatic sulfone backbone underlies stability across the full pH range
- Absolute pore size rating holds consistent across every lot
- Antibody and protein samples pass through PES with minimal adsorptive loss
Housing Characteristics
- Optimized internal geometry minimizes backpressure in service
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 3.4 bar (50 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 13mm
- Filtration Area
- 1.3cm²
- Holdup Volume
- 0.5ml
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophilic
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Content Uniformity - Clarifies dense pharmaceutical samples easily, ensuring consistent results in uniformity testing without filter blockage.
Related Products