Whatman GD/X Cellulose Acetate (CA) Syringe Filters, 0.2 µm, 13 mm, 150/Pk - 6880-1302
Whatman pairs a borosilicate fiber depth layer with the finishing membrane inside every GD/X unit, a construction meant to process loads heavy enough to clog a conventional one-stage filter. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. Cellulose acetate binds less protein than mixed cellulose ester of similar pore size and stays stable across pH 4 to 8. The polypropylene housing presses snugly against the membrane during the pass and sheds virtually no extractable material into the sample. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Prefiltration
- Nominal glass microfiber depth layer sustains flow through high-solids, particle-laden samples
- Glass microfiber prefilter shields the downstream membrane from bulk particulate
- High dirt-holding capacity extends usable throughput by delaying membrane clogging
- Glass microfiber depth media loads particulate across its full thickness
Membrane Characteristics
- Retains particles at the membrane surface instead of throughout its thickness
- Tolerates methanol and ethanol at typical laboratory working concentrations
- Cellulose ester backbone stable across aqueous pH range of 4 to 8
- Minimal non-specific adsorption of analytes at the membrane surface
- Absolute-rated pores ensure the same particle cutoff every run
Housing Characteristics
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Minimal extractable release from the housing supports sensitive analytical work downstream
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 3.4 bar (50 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 13mm
- Filtration Area
- 1.3cm²
- Holdup Volume
- 0.5ml
- Material
- Cellulose Acetate
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophilic
- Beverage Clarification - Removes haze-causing particulates from wine, beer, and juice samples ahead of quality and stability testing.
- Biomarker Assay Prep - Low-binding CA prevents biomarker adsorption during sample prep, preserving analyte concentrations for immunoassay panels.
- Urinalysis Prep - CA clarifies urine samples by removing particulates ahead of automated urinalysis without altering biochemical composition.
- Diagnostic Assays - Delivers reliable results in enzymatic tests by limiting adsorption of active reagents to the membrane surface.
- Biological Solutions - Offers a stable, hydrophilic membrane for sensitive aqueous fluids, letting critical analytes pass through freely.
- Temperature Stability - Maintains integrity across normal lab bench temperatures for consistent, dependable filtration performance.