Whatman GD/X Glass Fiber (GF) Syringe Filters, 2.7 µm, 13 mm, 150/Pk - 6888-1327
Whatman pairs a borosilicate fiber depth layer with the finishing membrane inside every GD/X unit, a construction meant to process loads heavy enough to clog a conventional one-stage filter. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. Glass fiber draws aqueous samples through without preconditioning while staying biologically inert across diverse chemistries and sustains high dirt-loading capacity through depth filtration. The polypropylene housing routes flow to minimize backpressure in service while staying inert across common laboratory solvents and sheds virtually no extractable material into the sample. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- High wet strength of glass fiber maintains integrity when saturated with aqueous or organic media
- Continuous glass fiber microstructure supports even flow distribution across the filter face
- Handles acidic, neutral, and mildly alkaline aqueous samples without matrix degradation
- Fiber matrix sustains throughput as particulate load builds within the filter depth
- Borosilicate glass contributes no extractable organic background to the filtrate
Housing Characteristics
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Thermal-bonded construction keeps adhesives out of the fluid path
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- The seal formed against the membrane blocks bypass at rated operating pressure
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Glass Microfiber (Binder Free)
- Diameter
- 13mm
- Filtration Area
- 1.33cm²
- Flow Rate
- Very Fast
- Material
- Glass Micro Fiber
- Maximum Operating Temperature (°C)
- 550°C
- Membrane Thickness (µm)
- 675µm
- Pack Count
- 150
- Pore Size (µm)
- 2.7
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 500°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophilic
- Milk and Dairy Analysis - Glass fiber prefiltration removes casein and fat globules from dairy samples ahead of HPLC and ion chromatography.
- Heavy Metal Digests - Glass fiber removes undissolved particulates from acid-digested soil and water samples ahead of ICP and AAS analysis.
- TOC Sample Filtration - Glass fiber prefilters aqueous samples ahead of total organic carbon analysis, removing particles without adding carbon.
- Analysis Prep - Ensures reliable clarification in multi-stage filtration stacks, effectively removing gross debris and precipitates safely.
- Wastewater Effluent Prep - Glass fiber removes suspended solids from industrial effluent ahead of COD, BOD, and nutrient compliance analysis.
- Pathogen Detection Prep - Clears turbidity from food and water samples ahead of Salmonella and Pseudomonas enumeration, preventing membrane clogging.