Whatman GD/X Glass Fiber (GF) Syringe Filters, 0.7 µm, 13 mm, 150/Pk - 6890-1307
Whatman stages multiple glass fiber layers inside the GD/X cartridge to intercept particles in progressive steps, leaving only the smallest fraction to reach the tightly rated final membrane. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. The glass microfiber matrix delivers nominal retention as a depth medium while wetting rapidly with aqueous samples and resists chemical attack across diverse solvents. Low-extractable polypropylene keeps sample purity intact through the filtration pass and stands firm against aqueous acids, bases, and alcohols during regular handling. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Silanol groups on borosilicate fiber surfaces provide inherent chemical reactivity
- Compatible with common biological buffers including phosphate, Tris, HEPES, and borate
- Nominal pore ratings available from below one micron to coarse prefilter grades
- Inorganic fiber composition resists biodegradation during extended holding or room-temperature storage
- High wet strength of glass fiber maintains integrity when saturated with aqueous or organic media
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Impact-tolerant polypropylene body withstands routine bench handling without damage
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Glass Microfiber (Binder Free)
- Diameter
- 13mm
- Filtration Area
- 1.33cm²
- Flow Rate
- Fast
- Material
- Glass Micro Fiber
- Maximum Operating Temperature (°C)
- 550°C
- Membrane Thickness (µm)
- 420µm
- Pack Count
- 150
- Pore Size (µm)
- 0.7
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 500°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophilic
- Pre-filtration - Acts as a robust depth filter that protects downstream membranes, significantly extending final filtration service life.
- Feed and Forage Analysis - Glass fiber removes undissolved feed matrix particles ahead of nutrient extraction and proximate composition analysis.
- Analysis Prep - Ensures reliable clarification in multi-stage filtration stacks, effectively removing gross debris and precipitates safely.
- Bioanalytical Prep - Clears precipitated plasma and serum proteins ahead of LC-MS/MS assay, protecting columns and autosampler needles.
- Chlorophyll Analysis - Retains phytoplankton biomass for chlorophyll-a and pheophytin-a extraction under EPA Method 445.0 in limnological monitoring.
- QuEChERS Extract Prep - Clarifies lipid-laden produce extracts ahead of GC-MS pesticide residue analysis, preventing analytical column fouling.