Whatman GD/X Glass Fiber (GF) Syringe Filters, 0.45 µm, 25 mm, 50/Pk - 6902-2504
Whatman fits more prefiltration capacity into the GD/X housing without enlarging it, a space-efficient answer for samples too demanding for one filtration pass. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. Naturally hydrophilic glass fiber wets rapidly with aqueous samples while offering broad chemical compatibility and sustains high dirt-loading capacity through depth filtration. Pre-sterilized polypropylene construction is individually wrapped for direct use in sterile workflows while resisting degradation from routine sample matrices and holds its seal true run after run. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- Compatible with common biological buffers including phosphate, Tris, HEPES, and borate
- Reduces bioburden and particulate load ahead of sterilizing-grade filtration
- Glass fiber resists thermal shock from rapid temperature changes in sample preparation
- High internal surface area supports broad particle interception throughout fiber depth
- Fiber matrix sustains throughput as particulate load builds within the filter depth
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Withstands ethylene oxide gas sterilization without embrittlement or structural damage
- Optimized internal geometry minimizes backpressure in service
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request Whatman's performance credentials before you commit to a filtration standard requiring documented quality.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Holdup Volume
- 1.4ml
- Material
- Glass Micro Fiber
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 550°C
- Pack Count
- 50
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophilic
- Geological Sample Prep - High dirt-loading capacity across two glass stages processes heavily loaded environmental extracts without early clogging.
- Wastewater Effluent Prep - Glass fiber removes suspended solids from industrial effluent ahead of COD, BOD, and nutrient compliance analysis.
- Downstream Purification - Reduces turbidity in fermentation broth ahead of capture chromatography, protecting resin binding capacity and column life.
- Analysis Prep - Ensures reliable clarification in multi-stage filtration stacks, effectively removing gross debris and precipitates safely.
- Chlorophyll Analysis - Retains phytoplankton biomass for chlorophyll-a and pheophytin-a extraction under EPA Method 445.0 in limnological monitoring.
- Milk and Dairy Analysis - Glass fiber prefiltration removes casein and fat globules from dairy samples ahead of HPLC and ion chromatography.