Chat with us, powered by LiveChat

Secure Checkout
GD/X 25mm Syringe Filter, PES, 0.45um (1500 pcs)

Thumbnail Filmstrip of GD/X 25mm Syringe Filter, PES, 0.45um (1500 pcs) Images

    Purchase GD/X 25mm Syringe Filter, PES, 0.45um (1500 pcs)

    GD/X 25mm Syringe Filter, PES, 0.45um (1500 pcs)
    Whatman SKU: 6905-2504

    $3,273.99
    Ships in 4 business days
     

    Whatman GD/X Polyethersulfone (PES) Syringe Filters, 0.45 µm, 25 mm, 150/Pk - 6905-2504

    Whatman pairs a borosilicate fiber depth layer with the finishing membrane inside every GD/X unit, a construction meant to process loads heavy enough to clog a conventional one-stage filter. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. PES stays stable across the full pH 1 to 14 range and loads aqueous buffers with zero pre-wetting delay. The PP housing sustains full structural integrity during elevated-temperature filtration operations while preserving sample chemistry across the flow path and maintains a low-dead-volume internal flow path. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.

    Prefiltration

    • High dirt-holding capacity extends usable throughput by delaying membrane clogging
    • Nominal glass microfiber depth layer sustains flow through high-solids, particle-laden samples
    • Upstream glass microfiber prefilter layer captures coarse particulate ahead of the membrane
    • Glass microfiber prefilter shields the downstream membrane from bulk particulate

    Membrane Characteristics

    • Aromatic sulfone backbone underlies stability across the full pH range
    • Sulfone backbone's hydrolytic stability tolerates repeated autoclave steam sterilization cycles
    • PFAS extractables test non-detectable under EPA Method 537.1
    • Antibody and protein samples pass through PES with minimal adsorptive loss
    • Mechanical strength keeps the matrix intact under vacuum or pressure

    Housing Characteristics

    • Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
    • Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
    • Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
    • Standardized luer connection geometry provides secure engagement with standard syringe tips

    Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.

    Sterilization Guidance

    The housing supports customer autoclave sterilization at 121°C for 30 minutes.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    2.3 bar (33 psi)
    Burst Pressure (psi)
    75psi
    Connection Type
    Luer-Lok/ Luer Slip
    Construction
    Polypropylene
    Diameter
    25mm
    Filtration Area
    4.6cm²
    Flow Rate
    30
    Holdup Volume
    1.4ml
    Material
    Polyethersulfone (PES)
    Maximum Operating Pressure
    75psi
    Maximum Operating Temperature (°C)
    121°C
    Pack Count
    150
    Pore Size (µm)
    0.45
    Prefilter (Yes/No)
    Yes
    Prefilter Material
    Glass Microfiber (GMF)
    Sterility
    Nonsterile
    Sterilization
    Autoclavable 121°C
    Volume Throughput (ml)
    Up to 100ml
    Wettability
    Hydrophilic
    • Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
    • Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
    • Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
    • Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.
    • Tissue Processing - Prepares biological tissue homogenates smoothly, managing high protein and cellular debris for cleaner downstream analysis.
    • Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.