Whatman GD/XP PVDF Syringe Filters, 0.45 µm, 25 mm, 150/Pk - 6972-2504
Whatman ties GD/XP prefiltration performance to one closely held polypropylene specification applied at every production run, keeping ion-clean results repeatable from lot to lot. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. The PVDF membrane tolerates common chromatography solvents without degradation while keeping HPLC analytes from adhering to the pore surface and wets HPLC samples despite a hydrophobic fluoropolymer backbone underneath. The polypropylene housing preserves sample chemistry across the flow path while maintaining a low-dead-volume internal flow path and holds its seal true run after run. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Prefiltration
- Polypropylene prefilter resists acids, bases, and common organic solvents
- High dirt-holding capacity sustains flow through turbid, viscous, particle-laden samples
- Two-stage construction pairs an upstream polypropylene depth prefilter with the final membrane
- Nonwoven polypropylene matrix captures coarse particulate through its depth
Membrane Characteristics
- Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack
- Limiting oxygen index runs high, supporting flame resistance and low smoke
- Adsorptive loss of HPLC analytes stays immeasurably low
- Low extractables preserve a clean chromatographic baseline
- Cast membrane structure releases no fibers, unlike depth-media prefilters
Housing Characteristics
- Medical-grade polypropylene with broad chemical compatibility
- Optimized internal geometry minimizes backpressure in service
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Thermal-bonded construction keeps adhesives out of the fluid path
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.2 bar (17 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Holdup Volume
- 1.4ml
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Polypropylene (10µm + 5µm)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- HPLC Prep - Delivers high flow rates for mild organic HPLC mobile phases, ensuring clean baselines and protecting analytical columns.
- Trace Analysis - Prevents non-specific binding in trace analysis, keeping low-concentration analytes in solution for reliable detection.
- Microbiome Sampling - Concentrates waterborne microbial cells on a low-binding membrane ahead of DNA extraction and metagenomics sequencing.
- Forensic Toxicology Screening - Clarifies urine samples ahead of LC-MS drug screening, supporting reliable detection of abused drugs and metabolites.