Whatman Puradisc Cellulose Acetate (CA) Syringe Filters, 0.2 µm, 30 mm, 50/Pk - 10462200
Whatman's filtration expertise, refined across a century-plus of disciplined manufacturing, has made its name synonymous with laboratory-grade quality worldwide. Sterilizing-grade retention is built into the membrane itself, clearing bacteria as the syringe pushes sample through. Cellulose acetate admits water-based reagents immediately, with no surfactant step and handles water-based samples and low-alcohol solutions. Polycarbonate construction handles routine aqueous sample matrices while standing up to rugged field and bench handling and sustains high operating pressures without deformation. Where bacterial contamination must stay out of the sample, the sub-micron pore rating clears it before the sample reaches the instrument.
Technical Specifications
- Clarifies aqueous HPLC mobile phases and injection samples ahead of column exposure.
- Cellulose acetate's open pore structure supports high flow rates at low operating pressure.
- Food-contact-approved composition supports clarification of wine, beer, juice, and dairy beverages
- Accepts gamma irradiation or ethylene oxide exposure as alternative sterilization methods to autoclaving
- Tolerates methanol and ethanol at typical laboratory working concentrations
Housing Specifications
- Gamma-stabilized housing resists radiation-induced embrittlement during terminal sterilization
- Rigid construction holds dimensional tolerance under filtration load
- High-impact-strength housing resists cracking under demanding handling
- Suited to aqueous samples, buffers, and reagents
Clarify your routine aqueous samples in a single pass and cut down on juggling multiple filter types at the bench. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Ask about a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 3.4 bar (50 psi)
- Burst Pressure (psi)
- 100psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polycarbonate
- Diameter
- 30mm
- Filtration Area
- 5.7cm²
- Holdup Volume
- <50µl
- Material
- Cellulose Acetate
- Maximum Operating Pressure
- 100psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 50
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 150ml
- Wettability
- Hydrophilic
- UV Spectroscopy Prep - CA's naturally hydrophilic, low-binding surface avoids analyte loss during sensitive UV-Vis sample prep work.
- Sterile Media Prep - Ships pre-sterilized in a blister pack for aseptic cell culture media preparation, protecting sensitive cultures.
- Beverage Clarification - Removes haze-causing particulates from wine, beer, and juice samples ahead of quality and stability testing.
- Groundwater Analysis - Separates the dissolved fraction of environmental water samples ahead of trace metal analysis by ICP-MS or ICP-OES.
- CE Sample Prep - Delivers clean, particulate-free samples for capillary electrophoresis, safeguarding capillary integrity and run reproducibility.
- HPLC Sample Prep - Clarifies injection samples and mobile phases ahead of LC analysis, protecting columns from particulate fouling.