Whatman Puradisc PTFE Syringe Filters, 0.2 µm, 30 mm, 50/Pk - 10462300
Whatman has built such a strong track record in published methods that laboratories default to citing its name in standardized protocols. Gas and vent service calls for a hydrophobic syringe filter rated to the same sterilizing-grade pore size as its liquid counterpart. PTFE filters aggressive organic solvents without swelling or breakdown while suiting gas, vent, and solvent-stream filtration and stays chemically inert against solvents, acids, and alkalis. The polycarbonate housing stands up to rugged field and bench handling while closing tightly enough that sample only exits through the membrane and sustains high operating pressures without deformation. No separate sterilization cycle is needed when the gas path already runs through a validated sterile-grade membrane.
Membrane Characteristics
- Minimal moisture absorption pairs with a low tare mass
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Ionic and metallic extractable levels stay very low
- Biological inertness resists enzymatic attack from proteases and lipases
- UL 94 V-0 rating confirms the highest self-extinguishing classification
Housing Characteristics
- PC housing withstands dilute aqueous acid and base sample matrices at ambient conditions
- Luer-compatible polycarbonate housing connects securely with standard syringe outlets for hand-pressure filtration
- Heat deflection temperature near 135°C gives the housing thermal headroom above typical aqueous filtration conditions
- Flexural rigidity resists housing collapse under vacuum-driven filtration
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request a quote on Whatman filtration products from the Tisch Scientific team.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.0 bar (15 psi) [IPA]
- Burst Pressure (psi)
- 100psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polycarbonate
- Diameter
- 30mm
- Filtration Area
- 5.7cm²
- Holdup Volume
- <50µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 100psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 50
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 150ml
- Wettability
- Hydrophobic
- UV Spectroscopy - Clarifies solvent-based samples before UV/Vis analysis, removing scattering particulates for precise, reliable absorbance readings.
- Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Non-Aqueous CE - Prepares non-aqueous electrophoresis samples with low background noise for clean, high-resolution separation and analysis.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.