Whatman Puradisc PVDF Syringe Filters, 0.45 µm, 25 mm, 1000/Pk - 6749-2504
Whatman verifies performance ratings at the lot level using process controls that stay uniform across its entire filtration lineup. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. Hydrophilic PVDF suits HPLC sample preparation with immediate, reliable uptake and rejects particles above its absolute size threshold. The polypropylene housing preserves sample chemistry across the flow path while pressing snugly against the membrane during the pass and sustains efficient flow on viscous samples. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Low ionic extractables preserve baseline stability in conductivity-based ion chromatography detection
- Filtration preserves mammalian cell viability, phenotype, and growth
- Protein and peptide sample loss to adsorption stays minimal
- Organic solvent resistance beats PES or nylon at comparable pore size
- Autoclave sterilization cycles leave pore structure and flow performance intact
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Medical-grade polypropylene with broad chemical compatibility
- The seal formed against the membrane blocks bypass at rated operating pressure
- Polypropylene housing withstands operating temperatures up to 121°C without softening or dimensional distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request a quote on Whatman filtration products from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.2 bar (17 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Holdup Volume
- <100µl
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- IC Guard Filtration - Removes particulates from aqueous samples before ion analysis, keeping detector cells free of fouling between injections.
- Pre-Blot Sample Prep - Ensures ultra-low protein binding for maximum sample recovery ahead of sensitive immunodetection protocols and assays.
- Water Quality Monitoring - Clarifies environmental and drinking water samples ahead of turbidity, ion, or contaminant testing in monitoring programs.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- LC-MS Sample Prep - Delivers low-extractable filtrates that prevent ion suppression, supporting clean baselines for LC-MS analysis.
- Spectroscopy Prep - Provides optical clarity and low background interference, ideal for UV-Vis and fluorescence sample preparation work.