Whatman Puradisc Nylon Syringe Filters, 1 µm, 25 mm, 1000/Pk - 6753-2510
Whatman has built such a strong track record in published methods that laboratories default to citing its name in standardized protocols. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. The nylon matrix handles alcohols and aliphatic and aromatic solvents while drawing aqueous samples through without pre-wetting and screens out particles wider than the membrane's rated diameter. Polypropylene construction resists chemical degradation from routine sample matrices while routing flow to minimize backpressure in service and sheds virtually no extractable material into the sample. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- Tortuous, reticulated pore structure yields more usable filtration area than capillary-pore membranes
- Absolute pore size rating holds consistent across every protocol
- Resin melting point runs near 264°C
- Non-fibrous membrane structure resists media shedding into the filtrate
- Polar amide backbone gives high native affinity for nucleic acids
Housing Characteristics
- Housing retains dimensional stability and seal integrity through elevated-temperature operation up to 121°C
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Holdup Volume
- <100µl
- Material
- Nylon
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 1000
- Pore Size (µm)
- 1
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophilic
- Cosmetics Batch Testing - Filters aqueous lotions, serums, and personal care products for particulate QC and potency assay sampling.
- Buffer Filtration - Delivers high mechanical strength for efficient clarification of alkaline buffers and aqueous reagents in the lab.
- Mining Process Waters - Clarifies process water samples from hydrometallurgical operations, removing solids ahead of ICP-MS trace metal quantitation.
- HPLC Sample Prep - Clarifies mixed aqueous and organic solvents to ensure stable baselines and protect chromatography columns from clogging.
- Water Quality Monitoring - Removes suspended solids from environmental water samples for routine total suspended solids testing.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.