Whatman Puradisc PVDF Syringe Filters, 0.45 µm, 13 mm, 2000/Pk - 6765-1304
Whatman has built such a strong track record in published methods that laboratories default to citing its name in standardized protocols. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. A hydration layer at the pore surface keeps HPLC analytes from adhering and resists HPLC mobile phases, alcohols, and mild hydrocarbons. Polypropylene construction holds its dimensional form through high-temperature sample preparation while routing flow to minimize backpressure in service and presses snugly against the membrane during the pass. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Absolute pore rating ensures reproducible results between test runs
- Adsorptive loss of HPLC analytes stays immeasurably low
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Resistance to hydrolytic degradation exceeds that of nylon membranes
- Intrinsic protein binding runs lower than nylon or mixed cellulose ester
Housing Characteristics
- Resists stress cracking from aqueous salt and buffer solutions
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.2 bar (17 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 13mm
- Filtration Area
- 1.3cm²
- Holdup Volume
- <25µl
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 2000
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophobic
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Capillary Electrophoresis Prep - Clarifies CE sample buffers and matrices, supporting stable electropherogram baselines for accurate results.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Forensic Toxicology Screening - Clarifies urine samples ahead of LC-MS drug screening, supporting reliable detection of abused drugs and metabolites.
- Trace Analysis - Prevents non-specific binding in trace analysis, keeping low-concentration analytes in solution for reliable detection.