Whatman Puradisc PTFE Syringe Filters, 0.2 µm, 25 mm, 50/Pk - 6784-2502
Whatman's filtration expertise, refined across a century-plus of disciplined manufacturing, has made its name synonymous with laboratory-grade quality worldwide. Each hydrophobic vent-rated filter carries manufacturer bacterial retention testing built into the design, letting a vent line stay in continuous service without repeating that testing on site between uses. Chemically inert PTFE resists attack from the harshest process chemistries while blocking aqueous ingress in vent applications and achieves sterile-grade retention in gas and vent service. Polypropylene construction resists chemical degradation from routine sample matrices and sheds virtually no extractable material into the sample. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.
Membrane Characteristics
- Node-fibril microstructure resists compaction under sustained operating pressure
- Ionic and metallic extractable levels stay very low
- Non-fibrous, fully synthetic structure sheds no fibers into filtrate
- Inert composition offers no nutrient source for microbial growth
- Insolubility in all known organic solvents avoids swelling and pore distortion
Housing Characteristics
- Optimized internal geometry minimizes backpressure in service
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- PP housing rated to 121°C holds its geometry through high-temperature sample preparation and processing
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work so your downstream method starts with a clean sample. Request Whatman's lot documentation and performance history to support your protocol validation.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.0 bar (15 psi) [IPA]
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Flow Rate
- ~20 (MeOH)
- Holdup Volume
- <100µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 50
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- UV Spectroscopy - Clarifies solvent-based samples before UV/Vis analysis, removing scattering particulates for precise, reliable absorbance readings.
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
Related Products