Whatman Puradisc PTFE Syringe Filters, 0.45 µm, 25 mm, 50/Pk - 6784-2504
Whatman standardizes its manufacturing platform to the point that consistency and thorough lot-level records come as a default, exactly what analytical laboratory work demands. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. Chemically inert PTFE resists attack from the harshest process chemistries while handling concentrated acids and strong bases and blocks aqueous ingress in vent applications. Polypropylene construction resists chemical degradation from routine sample matrices and routes flow to minimize backpressure in service. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Stable across a wide operating temperature range for demanding methods
- Insolubility in all known organic solvents avoids swelling and pore distortion
- High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
- Absolute pore rating delivers reproducible retention across every protocol
- Non-wetting pore surface blocks liquid water while passing water vapor freely
Housing Characteristics
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
- Resists stress cracking from aqueous salt and buffer solutions
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request Whatman's performance credentials before you commit to a filtration standard requiring documented quality.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 0.6 bar (9 psi) [IPA]
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Flow Rate
- ~30 (MeOH)
- Holdup Volume
- <100µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 50
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- UV Spectroscopy - Clarifies solvent-based samples before UV/Vis analysis, removing scattering particulates for precise, reliable absorbance readings.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
Related Products