Whatman Puradisc PTFE Syringe Filters, 1 µm, 25 mm, 50/Pk - 6784-2510
Whatman draws on Cytiva's broader manufacturing oversight while continuing a legacy of filtration work that touches laboratory research, environmental monitoring, and industrial processing alike. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. The PTFE matrix handles concentrated acids and bases across demanding methods while withstanding aggressive organics that degrade other media and reaches the same absolute retention on every run. The polypropylene housing preserves sample chemistry across the flow path while pressing snugly against the membrane during the pass and sustains efficient flow on viscous samples. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
- Water contact angle near 120 degrees marks strong hydrophobicity
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Gas-venting and liquid-blocking function survives repeated autoclave sterilization cycles
Housing Characteristics
- Housing retains dimensional stability and seal integrity through elevated-temperature operation up to 121°C
- Resists stress cracking from aqueous salt and buffer solutions
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- The seal formed against the membrane blocks bypass at rated operating pressure
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Holdup Volume
- <100µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 50
- Pore Size (µm)
- 1
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Non-Aqueous CE - Prepares non-aqueous electrophoresis samples with low background noise for clean, high-resolution separation and analysis.
- UV Spectroscopy - Clarifies solvent-based samples before UV/Vis analysis, removing scattering particulates for precise, reliable absorbance readings.
- Cosmetics Testing - Clarifies lotions and emulsions after alcohol pre-wetting, keeping products free of particulate contaminants.
- Venting Applications - Protects vacuum pumps and vents bioreactors using a hydrophobic PTFE membrane that forms a reliable air barrier.