Whatman Puradisc PTFE Syringe Filters, 0.2 µm, 25 mm, 200/Pk - 6785-2502
Whatman's filtration expertise, refined across a century-plus of disciplined manufacturing, has made its name synonymous with laboratory-grade quality worldwide. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. PTFE filters aggressive organic solvents without swelling or breakdown while resisting attack from the harshest process chemistries and provides bacterial retention in gas and vent streams. Polyolefin construction sheds virtually no extractable material into the sample while standing firm against aqueous acids, bases, and alcohols during regular handling and sustains efficient flow on viscous samples. No separate sterilization cycle is needed when the gas path already runs through a validated sterile-grade membrane.
Membrane Characteristics
- Validated against an aerosol Brevundimonas diminuta bacterial challenge
- Stable across a wide operating temperature range for demanding methods
- Insolubility in all known organic solvents avoids swelling and pore distortion
- Ionic and metallic extractable levels stay very low
- Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
Housing Characteristics
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request Whatman's quality documentation to support your filtration step meeting a recognized laboratory-science standard.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.0 bar (15 psi) [IPA]
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Flow Rate
- ~20 (MeOH)
- Holdup Volume
- <100µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 200
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Cosmetics Testing - Clarifies lotions and emulsions after alcohol pre-wetting, keeping products free of particulate contaminants.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Non-Aqueous CE - Prepares non-aqueous electrophoresis samples with low background noise for clean, high-resolution separation and analysis.
- Water Monitoring - After alcohol pre-wet, PTFE's chemical inertness holds up through repeated environmental sample runs without degrading.