Chat with us, powered by LiveChat

Secure Checkout
Pura Disc 25mm PP Syringe Filters, 0.45um, 50 Pk

Thumbnail Filmstrip of Pura Disc 25mm PP Syringe Filters, 0.45um, 50 Pk Images

    Purchase Pura Disc 25mm PP Syringe Filters, 0.45um, 50 Pk

    Pura Disc 25mm PP Syringe Filters, 0.45um, 50 Pk
    Whatman SKU: 6786-2504

    $226.95
    Ships in 4 business days
     

    Whatman Puradisc Polypropylene (PP) Syringe Filters, 0.45 µm, 25 mm, 50/Pk - 6786-2504

    Whatman standardizes its manufacturing platform to the point that consistency and thorough lot-level records come as a default, exactly what analytical laboratory work demands. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. The polypropylene membrane holds up to aggressive process chemistries while remaining compatible with organic and non-aqueous fluids and keeps binding low while capturing particulates through its depth. The PP housing sustains full structural integrity during elevated-temperature filtration operations while maintaining a low-dead-volume internal flow path and presses snugly against the membrane during the pass. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.

    Membrane Characteristics

    • Nonpolar surface chemistry favors organic solvents and other non-aqueous liquids
    • Low binding throughout the depth matrix preserves dilute analyte concentration
    • PP/PE depth medium tolerates progressive particle accumulation as dirt-holding capacity fills
    • Captures coarse particles near the surface and fine particles deeper within
    • Flexible polypropylene fiber matrix adapts to modest pressure cycles without fracture

    Housing Characteristics

    • The seal formed against the membrane blocks bypass at rated operating pressure
    • Thermal-bonded construction keeps adhesives out of the fluid path
    • Optimized internal geometry minimizes backpressure in service
    • PP housing rated to 121°C holds its geometry through high-temperature sample preparation and processing

    A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.

    Sterilization Guidance

    Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    (Hydrophobic)
    Burst Pressure (psi)
    75psi
    Connection Type
    Luer-Lok/ Luer Slip
    Construction
    Polypropylene
    Diameter
    25mm
    Filtration Area
    4.2cm²
    Holdup Volume
    <100µl
    Material
    Polypropylene (PP)
    Maximum Operating Pressure
    75psi
    Maximum Operating Temperature (°C)
    121°C
    Pack Count
    50
    Pore Size (µm)
    0.45
    Prefilter (Yes/No)
    No
    Sterility
    Nonsterile
    Sterilization
    Autoclavable 121°C
    Volume Throughput (ml)
    Up to 100ml
    Wettability
    Hydrophobic
    • Ink and Pigment Testing - Clarifies ink and pigment dispersions in organic carrier solvents for particle size and spectroscopic measurement.
    • Industrial Solvent Monitoring - Clarifies organic solvent process streams and used-solvent recovery batches for quality and contamination analysis.
    • Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.
    • Mineral Acid Compatibility - Withstands concentrated hydrochloric acid and strong caustic bases in aqueous inorganic extraction workflows.
    • DMSO Solution Handling - Filters dimethyl sulfoxide preparations and drug formulations without the membrane degradation of less resistant polymers.
    • Biopharma Prefiltration - Removes large particulates from fermentation and upstream bioprocess streams ahead of membrane filtration steps.

    Related Products