Whatman Puradisc Polypropylene (PP) Syringe Filters, 0.45 µm, 25 mm, 200/Pk - 6788-2504
Whatman's filtration expertise, refined across a century-plus of disciplined manufacturing, has made its name synonymous with laboratory-grade quality worldwide. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. Low-binding polypropylene sustains throughput as a depth medium and keeps water out during solvent and gas-purge steps. The polypropylene housing presses snugly against the membrane during the pass while maintaining a low-dead-volume internal flow path and preserves sample chemistry across the flow path. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Sustains continuous operation at temperatures up to 80°C
- Saturated hydrocarbon backbone resists the hydrolytic degradation common in ester-linked filter media
- Nonpolar surface chemistry favors organic solvents and other non-aqueous liquids
- Alcohol pre-wetting opens the hydrophobic matrix to aqueous sample streams
- Aqueous liquid is repelled while air passes freely through
Housing Characteristics
- Medical-grade polypropylene with broad chemical compatibility
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
- The seal formed against the membrane blocks bypass at rated operating pressure
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- (Hydrophobic)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Holdup Volume
- <100µl
- Material
- Polypropylene Depth Filter (DpPP)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 200
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Industrial Solvent Monitoring - Clarifies organic solvent process streams and used-solvent recovery batches for quality and contamination analysis.
- Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.
- Strong Base Filtration - Resists dilute sodium hydroxide and potassium hydroxide solutions for alkaline extraction and titration sample preparation.
- Bulk Solvent Filtration - Handles pressure fluctuations during syringe filtration of bulk solvents and lab reagents reliably.
- Ink and Pigment Testing - Clarifies ink and pigment dispersions in organic carrier solvents for particle size and spectroscopic measurement.
- Prefiltration Support - Protects downstream membrane filters by capturing gross contaminants, extending the purification system life.